Academic
Keywords
Shape Deposition Manufacturing

SDM,Shape Deposition Manufacturing,Shape Deposition Manufactured

Shape Deposition Manufacturing - SDM
Publications: 88| Citation Count: 665
Stemming Variations: Shape Deposition Manufactured
Cumulative Annual
    • Shape Deposition Manufacturing (SDM) is a layered manufacturing process involving an iterative combination of material addition and material removal. Polymer SDM processes have used castable thermoset resins to build a variety of parts. The strength of such parts is determined by the bulk material properties of the part materials and by their interlayer adhesion...

    J. W. Kietzmanet al. Material Strength in Polymer Shape Deposition Manufacturing

    • Shape Deposition Manufacturing (SDM) is a layered manufacturing process capable of building complex 3D parts through the combination of material addition and subtraction. Overhangs can be built with the help of sacrificial support materials. SDM achieves high surface quality by taking advantage of material subtraction by CNC machining. High surface quality in turn enables the fabrication of pre-assembled mechanisms that can be freed to turn or slide after removal of sacrificial support materials...

    Byong-Ho Parket al. Mesoscopic Assemblies with SDM Processing

    • Shape Deposition Manufacturing (SDM) is a layered manufacturing technique, which uses sequential steps of material deposition and removal to form 3-D structures. A Nd-YAG laser is used to produce fully dense, near net shape multi-material deposits. However, residual stresses caused by the temperature gradient and material property mismatches result in part inaccuracy, warpage, or even delamination...

    Xiao Chun Liet al. DESIGN AND FABRICATION OF MATERIALS FOR LASER SHAPE DEPOSITION MANUFAC...

    • Shape deposition manufacturing is an innovative rapid prototyping technology combining CNC machining and deposition processes and in which if a surface of the part is visible from the build direction it can be directly shaped into desired geometry on part material; if the part features are undercut or face away from the build direction, these part features will be sculptured into the support material in order to form a negative cavity at first, then the part material is deposited into this negative cavity in order to replicate these features into part material...

    Kaiyong Jianget al. Part decomposing algorithm based on STL solid model used in shape depo...

Sort by: