Academic
Publications
The use of tyre pyrolysis oil in diesel engines

The use of tyre pyrolysis oil in diesel engines,10.1016/j.wasman.2008.03.007,Waste Management,S. Murugan,M. C. Ramaswamy,G. Nagarajan

The use of tyre pyrolysis oil in diesel engines   (Citations: 4)
BibTex | RIS | RefWorks Download
Tests have been carried out to evaluate the performance, emission, and combustion characteristics of a single cylinder direct injection diesel engine fueled with 10%, 30%, and 50% of tyre pyrolysis oil (TPO) blended with diesel fuel (DF). The TPO was derived from waste automobile tyres through vacuum pyrolysis. The combustion parameters such as heat release rate, cylinder peak pressure, and maximum rate of pressure rise also analysed. Results showed that the brake thermal efficiency of the engine fueled with TPO–DF blends increased with an increase in blend concentration and reduction of DF concentration. NOx, HC, CO, and smoke emissions were found to be higher at higher loads due to the high aromatic content and longer ignition delay. The cylinder peak pressure increased from 71 bars to 74 bars. The ignition delays were longer than with DF. It is concluded that it is possible to use tyre pyrolysis oil in diesel engines as an alternate fuel in the future.
Journal: Waste Management , vol. 28, no. 12, pp. 2743-2749, 2008
Cumulative Annual
View Publication
The following links allow you to view full publications. These links are maintained by other sources not affiliated with Microsoft Academic Search.
Sort by: