Academic
Publications
A 90° phase-shift DLL with closed-loop DCC for high-speed mobile DRAM interface

A 90° phase-shift DLL with closed-loop DCC for high-speed mobile DRAM interface,10.1109/TCE.2010.5681119,IEEE Transactions on Consumer Electronics,Don

A 90° phase-shift DLL with closed-loop DCC for high-speed mobile DRAM interface  
BibTex | RIS | RefWorks Download
In this paper, a 90° phase-shift delay-locked loop (DLL) with closed-loop duty-cycle correction (DCC) is proposed. The proposed DLL increases the accuracies of the duty cycle and 90° phase shift by compensating PVT variation using a closed-loop DCC and a closed-loop 90° phase shift, and achieves a smaller area by reducing the delay-line length by 25% to 50% as compared to conventional DLLs with the DCC and/or 90° phase shift. We also propose a 90° phase detector consisting of a time-to-voltage converter and a sense amplifier to independently control and lock the DCC and 90° phase-shift loops. The proposed DLL is designed using the 0.13 μm process technology with a 1.2 V supply voltage. The operating frequency range is from 400 MHz to 800 MHz. Monte Carlo simulation results show that the output duty cycle error ranges from -0.21% to 0.22% for an input duty cycle range of 30% to 70%, and the 90° phase-shift error is less than 1.66°, which is lower than a 5.7ps error at 800 MHz. Finally, the power consumption of the proposed DLL is 2.8 mW at 800 MHz.
Journal: IEEE Transactions on Consumer Electronics - IEEE TRANS CONSUM ELECTRON , vol. 56, no. 4, pp. 2400-2405, 2010
Cumulative Annual
View Publication
The following links allow you to view full publications. These links are maintained by other sources not affiliated with Microsoft Academic Search.