Academic
Publications
Signal-to-Noise Ratio Performance of a Time-Varying Matching Network for Pulse-Based Systems

Signal-to-Noise Ratio Performance of a Time-Varying Matching Network for Pulse-Based Systems,10.1109/TMTT.2010.2090168,IEEE Transactions on Microwave

Signal-to-Noise Ratio Performance of a Time-Varying Matching Network for Pulse-Based Systems  
BibTex | RIS | RefWorks Download
This paper presents a study of the noise performance of a time-varying impedance matching technique. A mathematical model is developed for calculating the impulse response of the matching design that reconfigures itself in the real time between two subsystems. Based on this model, the signal-to-noise ratio (SNR) degradation of the matching network is defined and ana- lyzed. Simulations of a typical matching design for sources show that the SNR degradation is generally lower than 1 dB for common pulse signals including single-cycle sinusoids and Gaussian pulses. Particularly, the time-varying matching design for a high-quality source can be optimized to have an impulse response that matches monocycle pulses very well, leading to a near-optimal SNR performance (less than 0.1-dB SNR degra- dation). The theoretical results are validated experimentally by an implementation of the matching technique for electrically small loop antennas. Lower than 1.5-dB SNR degradation is measured for most cases. The effect of switch noise is also investigated in this paper.
Cumulative Annual
View Publication
The following links allow you to view full publications. These links are maintained by other sources not affiliated with Microsoft Academic Search.